Instant quote — 3DtoReal

3D printing · Dénia, Marina Alta

1 · Your model

Drop an STL, 3MF or OBJ here

or click to choose a file

Preview

Your model will appear here

Support material is shown once we have sliced it — get a quote below.

The sliced preview — every printed line, layer by layer — appears once we have sliced it.

2 · Options

Material & colour

Material

Multi-colour

Print settings

Nozzle

The nozzle is the opening that lays down melted material. A smaller nozzle captures finer details but prints more slowly; a larger nozzle makes thicker, faster, more robust lines.

The fixed left nozzle is 0.4 mm; the right changer carries 0.2, 0.4 and 0.6 mm. Choose the head explicitly for 0.4 mm.

Layer height

Layer height is the thickness of each printed layer. Thinner layers make curves and small details smoother, while thicker layers finish faster.

Infill

Infill is the structure inside the part. More infill can improve strength, but uses more material and takes longer. Walls often matter more than infill for functional parts.

Infill pattern

Wall loops

Brim width (mm)

A brim is a thin, removable outline printed around the base. It improves bed adhesion and reduces warping, especially on narrow or tall parts.

Supports

Does this print need supports?

Steep overhangs need scaffolding printed under them; it is removed after printing. Not sure? Choose the same material as the model — that covers the safe case.

Supports are enabled by default using the same material as your model. You can disable them or choose another material.

Quantity & delivery

Quantity

Delivery area

Approximate location — the exact shipping cost is calculated with your quote, from the weight and size of the order.

Rush — same/next day